Ordinary Discount Nitrogen Gas Generator For Food - Psa nitrogen generator – LDH Detail:
Psa nitrogen generator
Nitrogen Technical Parameters
1 - 3000Nm³/h
0.1- 1.5 Mpa
95% – 99.9995%
≤ – 45 ℃
how does a psa nitrogen generator work
PSA technology utilizes towers which are filled with carbon molecular sieve (CMS). Compressed air enters the bottom of the “online” tower and flows up through the CMS. Oxygen and other trace gases are preferentially adsorbed by the CMS, allowing nitrogen to pass through. After a pre-set time the on-line tower automatically switches to the regenerative mode, venting contaminants from the CMS. Carbon molecular sieve differs from ordinary activated carbons as it has a much narrower range of pore openings. This allows small molecules such as oxygen to penetrate the pores and separate from nitrogen molecules which are too large to enter the CMS. The larger molecules by-pass the CMS and emerge as nitrogen gas.
PSA psa nitrogen generators are typically used in applications where the purity requirement is higher than 99.5%, up to 99.9995%.
Psa nitrogen generator application
Nitrogen is a dry, insert gas used in a wide range of applications where oxygen may be harmful to the product or process such as laser cutting, SMT processing, food packing and so on.
A high-quality carbon molecular sieve (CMS) is used as an adsorbent, and separated from pure, dry compressed air by pressure swing adsorption to extract nitrogen. The diffusion rate of oxygen in the pores of the carbon molecular sieve is much higher than that of nitrogen, and under pressure, the carbon molecular sieve has a stronger ability to adsorb oxygen molecules, The separation of nitrogen and oxygen is carried out using these two molecular characteristics.
Typical applications for psa nitrogen generator
Metallurgical / heat treatment
Chemical and petrochemical industry
Oil and gas
Flow chart of Psa nitrogen generator
Psa nitrogen generator
Psa nitrogen generator Feature
1.Unique CMS safeguard are used to lengthen the life of CMS;
2.Nitrogen chain liberated air automatic system is used to guarantee the quality of nitrogen;
3.Air Cylinder Pressure are used to avoid CMS chalking by the high speed air impact;
4.Reasonable structural design are make sure the transport, lifting and installation easier;
5.Easy to use, plug and play.
Psa nitrogen generator of production equipment
Automatic welding machine
Automatic casing cutter
Automatic arc-submerging welder
Psa nitrogen generator Performance guarantee and after-sale service
All equipment in the contract be designed and manufactured in accordance with current Chinese & professional standard and regulations;
Warranty period: 12 months after formal running or 18 months after delivery, whichever occurs first;
Afterwards, prompt maintenance service and spare parts will be available with charge.
Documents and drawings provided by the seller shall be drawn in English version.
Psa nitrogen generator QA
1. Why is the psa nitrogen generator not in stock?
All pressure vessels have a service life, and the use of pressure vessels is also required to be registered. The spot equipment indicates that the stock has been produced for a period of time, which will affect the actual service life.
2. Why is your family’s psa nitrogen generator more expensive than others?
The psa nitrogen generator system consists of an air compressor, a cold dryer, a filter, a psa nitrogen generator, and a buffer tank. Psa nitrogen generators are non-standard equipment, and different brands of air compressors, freeze dryers, tanks, etc. are all at different prices. Too cheap equipment will also affect the overall service life.
A set of 500,000 equipment for 8 years and a set of 400,000 equipment for 5 years is completely different.
3. Why does the volume of the psa nitrogen generator affect the altitude?
The PSA Psa nitrogen generator uses the principle of pressure swing adsorption to separate nitrogen and oxygen from the air. The higher the altitude, the thinner the air, so the less nitrogen is extracted from the air. Therefore, the psa nitrogen generator is related to altitude.
4. Which is more suitable for purchasing liquid nitrogen and purchasing psa nitrogen generators?
The price of liquid nitrogen is related to the season. Generally, the production season is relatively expensive. (In the off-season 600-800 tons, the peak season is 1800-2500 tons, the difference in different regions is also different).
PSA psa nitrogen generators are mainly pre-equipment equipment and power consumption. The specific needs are calculated based on the yield purity.
5. What indicators do you need to achieve for psa nitrogen generator acceptance?
The acceptance of psa nitrogen generators generally depends on the amount of nitrogen produced and the concentration of nitrogen produced. These two relatively direct indicators.
6. How to maintain the psa nitrogen generator in the later stage?
The daily maintenance of the psa nitrogen generator is relatively simple:
(1) The air compressor should be regularly maintained, air filter, oil, and oil should be replaced by the manufacturer at regular intervals according to the instructions.
(2) The dryer should regularly check the pressure of the refrigerant to make it timely. The heat sink should be cleaned with compressed air every day. The filter element should be replaced regularly. The normal temperature is 8000H. It depends on the specific situation and pressure difference.
(3) Open the air storage tank drain once a day and drain the condensate from the air.
(4) Check the automatic drainer daily to avoid clogging and lose drainage. If it is blocked, open the manual valve slightly, close the self-discharge valve and then remove the automatic drainer to disassemble and clean. When cleaning the automatic drain, use soap to clean.
(5) The psa nitrogen generator mainly checks the working pressure, purity and flow rate of the adsorption tower.
Product detail pictures:
Related Product Guide:
VESDA: Air Sampling Smoke Detection Within Your Fire Alarm System | Nitrogen Generator Cost
North Florida Appropriations Project Bills For The 2019 Legislative Session | Nitrogen Gas Generator For Fire Sprinkler Systems
Being supported by an advanced and professional IT team, we could offer technical support on pre-sales & after-sales service for Ordinary Discount Nitrogen Gas Generator For Food - Psa nitrogen generator – LDH , The product will supply to all over the world, such as: Birmingham, Canada, Mauritius, We always adhere to follow the honesty, mutual benefit, common development, after years of development and the tireless efforts of all staff, now has perfect export system, diversified logistics solutions, comprehensive meet customer shipping, air transport, international express and logistics services. Elaborate one-stop sourcing platform for our customers!
Beijing LDH Technology Development Co., Ltd is a company specializing in gas separation equipment. There are mainly integrated enterprises in the design, research and development, production and sales of nitrogen generators, oxygen generators, ozone generators and liquid nitrogen generator. In the years of production and sales, we have met friends from all over the world and established a good partnership. Products are exported to Bangladesh, Indonesia, Pakistan, the Netherlands, Brazil, Australia and other countries.
The company has more than 10 years of experience in the professional technical team is engaged in gas design, research and development, to provide users with pre-sale, in-sale, after-sales technical support, including technical design, drawings, schedules, key projects, guidance installation, training, etc…Our equipment is subject to international standards. Before the equipment leaves the factory, we will conduct a comprehensive inspection and testing of each equipment so that each equipment can reach the standard before leaving the factory.
Our working attitude is to make every reliable product, solve the actual problems of customers, make every beautiful product, let customers feel not only easy to use, but also good-looking.
Our goal is to become the best enterprise in China’s gas separation industry. We have modern factories, modern production tools and young and passionate colleagues. We will strive to surpass ourselves and provide gas solutions for enterprises all over the world. We will use the best service to reflect our professionalism!
By Elizabeth from Algeria - 2017.09.26 12:12
A nice supplier in this industry, after a detail and careful discussion, we reached a consensus agreement. Hope that we cooperate smoothly.
By Lisa from Amman - 2017.12.09 14:01